First layer coating Tiger 1 and Hetzer (38t), 3d printerded two M3 75mm GMC

Tiger 1 early edition and Hetzer will get medium/dark grey finish. Tiger 1 was printed in black PLA, use grey a base coating is always a good idea. I ordered 10 x 10 x 1mm Balsa wood for bases, hope they will arrive soon. Will glue two or three together and make nice sloop.

Tiger 1
Armour: 25-100 mm
Main armament: 1× 8.8 cm KwK 36 L/56 92 AP and HE rounds
Secondary armament:  2× 7.92 mm MG 34 4,500 rounds 4,800 rounds (Ausf. E)
Engine:  Maybach HL230 P45 V-12 700 PS (690 hp, 515 kW)
Tanks encyclopedia: LINK

Jagdpanzer 38(t) - Hetzer 
Armor:  8-60 mm (0.31-2.36 in) Main armament     1x 7.5 cm Pak 39 L/48 41 rounds Secondary armament: 1× 7.92 mm Maschinengewehr 34 1,200 rounds
Engine: Praga 6-cylinder petrol, 7.8 litres 160 PS (158 hp, 118 kW) at 2,800 rpm
Tanks encyclopedia: LINK

Have 3d printed two M3 GMC with 75mm anti tank gun.

Armor: 0.25–0.625 in (6.4–15.9 mm)
Main armament: 1 × 75 mm (3.0 in) M1897A5 59 rounds
Engine: White 160AX, 386 in3 (6,330 cc), 6-cylinder, compression ratio: 6.44:1 147 hp (110 kW)
Tanks encyclopedia: LINK